Explosion-Proof Mobile Substation Transformer for Mines

Find the best explosion-proof mobile substation transformer for mines at our factory. We offer high-quality products to meet your specific needs.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
Explosion-Proof Mobile Substation Transformer
Specification
Capacity: 50-6300kVA
Trademark
OEM
Origin
China

Product Description


PRODUCT INTRODUCTION

PRODUCT ADVANTAGES
 
Mine explosion isolation mobile substation is a mobile complete set of equipment composed of dry-type transformer, high-voltage load switch or high-voltage vacuum switch, cable connector and low-voltage feed switch or low-voltage protection box etc.. It can be used to provide power supply for comprehensive mechanized coal mining equipment or hand-held electric drill and lighting in places where the underground environment is damp and contains gas and coal dust with the risk of explosion.
 

PERFORMANCE CHARACTERISTICS

I. Low free load loss.
  1. Adopt high-quality silicon steel sheet;
  2. The coiled core transformer can make full use of the orientation of silicon steel sheet and restore its magnetism through annealing process, so that its free load loss can be reduced by 20% -35%.

II. Low noise
  1. The noise mainly comes from the core and is transmitted to the surrounding area by the shell;
  2. Noise reduction measures:
      A. In order to reduce the noise source, the coiled core adopts seamless core with compact structure, small magnetic hysteresis               expansion and contraction and low noise.

      B.The joint place adds the silica gel plate, cut off the transmission way of the noise.

III. Light weight and small volume.

IV. The mobile substation has explosion-proof and moisture-proof performance.

V. The mobile substation has perfect overload, short circuit and electric leakage protection. There are electrical or mechanical interlocks between high-and low-voltage switches, high-voltage switches and upper-level circuit breakers.

VI. Energy-saving and environmental protection.
  1. Uses the imported DuPont Co., Ltd. class C insulation heat-resistant grade Nomex paper packaging line, with air insulation, cooling, pollution-free to the environment and long service life of the product; Products can be decomposed and recycled after their life;
  2. Adopting high-quality 30Q120 cold-rolled oriented silicon steel sheet and oxygen-free copper wire to make the actual total loss is lower than that of similar products both at home and abroad so as to save energy and reduce noise.




TECHNICAL PARAMETER

1. Explosion-proof type: Mine explosion isolation type; Explosion-proof sign: Exd I Mb;
2. Rated capacity: 50,100,200,315,400,500,630,800,1000,1250,1600,2000,2500,3150,4000,5000,6300 kVA;
3. Rated voltage: Primary voltage 6000V,10000 V, 
                            Secondary voltage 3450 (3300),1200 (1140),693 (660),400 (380) V;

4. Rated frequency: 50Hz;
5. Phase number: Three-phase;
6. Cooling mode: Air self-cooling (ANAN);
7. Heat-resistant grades of insulation materials: Grade H;
8. Technical performance data and connection group numbers: See Table 1 and Table 2;
9. Performance parameters of high and low voltage switch: See Table 3;
10. Insulation Level: See Table 4;


 
Table 1 The primary rated voltage 6 kV mine explosion isolation dry-type transformer performance parameters
 
Explosion-Proof Mobile Substation Transformer for Mines


Table 2 The primary rated voltage 10 kV mine explosion isolation dry-type transformer

Explosion-Proof Mobile Substation Transformer for Mines

Table 3 Performance parameters of high and low voltage switch

Explosion-Proof Mobile Substation Transformer for Mines
 
Table 4 Insulation Level

Explosion-Proof Mobile Substation Transformer for Mines

PRODUCT SIZE


Explosion-Proof Mobile Substation Transformer for Mines
 


APPLICATION AREA

It is mainly used as the main switch of the power supply system in the low voltage side of AC 50Hz, rated voltage 3300V, 1140V, 660V and rated current 1000A in the underground coal mine, and it is used in combination with the transformer capacity of 200~1600kva. It can be used in places where the altitude is 2000m with relative air humidity over 95% and the ambient temperature is -5 ºC ~ 40 ºC and with no dripping water or water immersion as well as places where there is no strong vibration and the vertical installation is inclined more than 15° and with the danger of methane and coal dust explosion. It is also with the high and low voltage interlocking function, which can realize the protection of leakage, lock-up, short circuit, overload, over-voltage and under-voltage etc.. Control and protect the power supply system with 10kv/ 50Hz of shifting high voltage side and ungrounded neutral point below current 630A. It is also used as a high voltage side switch with 10kv shifting low voltage section high voltage. It is also suitable for gas and vapor environment that are not good enough to corrode metals and damage insulation.


 


COMPANY PROFILE
 
ABOUT US
 
Shanxi Huaxin Electric Co., Ltd. is located in Yangquan, the largest anthracite base in China. Founded in May 2003, the company's registered capital was RMB 114 million, with total assets of RMB 815 million and the existing staff of over 1100. At present, our company has six industrial parks, divided into Changling Industrial Park, Four Mining Industrial Park, Lock Spring Industrial Park, Taiyuan Industrial Park, Jinnan Remanufacturing Park, and Jindong Remanufacturing Park, covering a total area of over 650 acres.

 
Explosion-Proof Mobile Substation Transformer for Mines
Explosion-Proof Mobile Substation Transformer for Mines
Explosion-Proof Mobile Substation Transformer for Mines
Explosion-Proof Mobile Substation Transformer for Mines


Our company has more than 30 patents now, mainly engaged in the R&D and production of intelligent electric automation, intelligent transportation and lifting, intelligent warehousing, power system, ventilation fluid and other series of over 80 products.

Our company has registered five R&D institutions in Beijing, Shenyang, Shanghai and Taiyuan, laying a solid foundation for technical upgrading and renewing generation for products.  And it has been responsible for the production of the high-efficiency, energy-saving core technology products required by the national Eleventh Five-year plan, and the research and  development of the high-efficiency permanent magnet motor and frequency conversion control,  the key projects of national energy-saving for the Twelfth Five-year plan.




CERTIFICATIONS
 
Explosion-Proof Mobile Substation Transformer for Mines
Explosion-Proof Mobile Substation Transformer for Mines
Explosion-Proof Mobile Substation Transformer for Mines



AWARDS

1.High-tech Enterprise, Provincial Technology Center
2.Two-phase Fusion Demonstration Enterprises
3.China Quality and Integrity Enterprise
4.Shanxi Top 100 Enterprises
5.Shanxi Top 100 Manufacturing Enterprises
6.Following Contract and Observing Credit Enterprise
7.Shanxi Quality and Reputation AAA-Class Enterprise
8.Small and Medium-sized Enterprises of Science and Technology
9.Technology Center of Shanxi Small and Medium-sized Enterprises
10.ISO9001 Quality Management System
11.ISO14001 Environmental Management System
12.ISO18001 Occupational Health and Safety Management System
13.National Torch Program
14.Golden Bridge Award of China Technical Market
15.Measurement Guarantee Unit




ACHIEVEMENTS

1.The first production enterprise in rare earth flameproof permanent magnet motor and flameproof flat coil core transformer for mining.
2.One of the country's three major mining transformation production bases, and the largest coal machine equipment manufacturing enterprise in Shanxi province.
3.The permanent magnet direct drive motor and frequency conversion control produced by our company, have put into use in Zhengzhou Coal Industry Group, Shanxi Coal and Chemical Industry Group, Yangquan Coal Industry Group and other major coal industry groups.
4.Distribution transformer products have been successfully shortlisted as qualified suppliers for National Power Grid and China Southern Power Grid.



ATTENTION

1.The payment term: We accept TT, 30% deposit and 70% balance against copy of BL.
2. The delivery time: Usually it will take about 3 months.
3. The standard of package: Usually use strong plywood case for protection.
4. Warranty: In 12 months since BL date.




SERVICE

1. Reply within 24 hours.
2. Perfect service commitment.
3. Provide services during the pre-sales, in-sales and after-sales, all the way (Including quality warranty).
4. Be free of charge in training and tutoring after sales.




CONTACT US

Foreign Trade Manager: Miss Evelin

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours