Gereral Introduction:
This slitting line is specially designed for slitting silicon steel sheet, sheet metal, copper foil, aluminum foil etc. into strips. It can be longitudinal shear slitting, winding.
- The whole line is arranged properly and all adopt electrical and hydraulic drive, convenient to operate and with high production efficiency.
- Key electrical control elements, hydraulic elements, PLC and speed governors are top-grade imported products. The speed of the whole line is synchronous and the the device runs stably and reliably.
- The blade axis of the longitudinal shearing machine is supported via main shaft bearings of the high-precision machine tool so that the blade axis has low axial and radial runout.
- The blade cutter adopts the locking made through three-point positioning via nuts with accurate size precision and firm locking.
Components:
1,Side guide rail is carbide sleeve type
2,Bearings imported from Germany FAG products
3,Intermediate relay from Japan Panasonic, power supply from Taiwan MW
4,The pneumatic components is used by Japanese SMC products
5,The main accessories in control cabinet, circuit breakers and relays are from Schneider products. Inverter from Delta
6,PLC from Siemens S7-200, with color touch screen; the button lights are from the German Muller products
7,Blade is carbide, main shaft diameter 150mm.
8,Other ordinary asynchronous motors are domestic famous brands.
9,Other structural parts of the equipment according to non-standard design and manufactured by seller
Main technical parameters of steel strip longitudinal shearing line
| Parameter Model | ZJ-1000 | ZJ-1250 | ||
| Material | silicon strip, stainless steel, copper coil, aluminum coil | |||
| Inner diameter of the coil (mm) | ¢ 500 | |||
| Width of coil (mm) | 1000 | 1250 | ||
| Weight of coil (t) | 3 | 5 | 5 | 10 |
| Strip Thickness (mm) | 0.20-0.35, 0.35-0.5 | |||
| Strip width (mm) | 40-1250 | |||
| Shearing speed (m/min) | 0-80 | 0-120 | 0-80 | 0-120 |
| Error of shearing width (mm) | ±0.1 | |||
| Shearing burr (mm) | ≤0.02 | |||
| Max winding diameter (mm) | ¢1000 | ¢1200 | ||
| Straightness deviation (mm/m) | ≤0.2/2 | |||
| Number of strips | 12 | |||
| Installation Power (kw) | Approximately 30/40 | Approximately 40/50 | ||
| Outline Dimension L*W*H (m) | Approximately 13×5.5×2 | Approximately 13×5.5×2 | ||
